-
The SIP WELDMATE® 120A MIG/ARC/TIG Inverter Welder is a multi-process inverter welder specifically designed for entry level users and small workshop applications. Supplied with all accessories needed to weld straight from the box, this gas and gasless welder also operates from a 13A supply for added flexibility. Fully compliant with Reg EU 2019/1784 (Eco Design for Welding Equipment), this welder features a 4th generation inverter which is above 80% energy efficient. This means it uses less power at the same output as older inverters, helping to lower operating costs. -
The SIP WELDMATE® AUTOPLUS 250A MIG/ARC/TIG Synergic Inverter Welder is a multi-process inverter welder specifically designed for use in automotive and garage environments. Fully compliant with Reg EU 2019/1784 (Eco Design for Welding Equipment), this welder features a 4th generation inverter which is above 80% energy efficient. This means it uses less power at the same output as older inverters, helping to lower operational costs. It also includes Pure Synergic Control, which allows users to adjust welding voltage and wire feed speed autonomously. This simplifies the welding process at all skill levels and helps to achieve more consistent and higher quality welds. -
The SIP WELDMATE® AUTOPLUS 130A MIG/ARC/TIG Synergic Inverter Welder is a multi-process inverter welder specificially designed for use in automotive and garage environments, and is powered from a 13A supply. Fully compliant with Reg EU 2019/1784 (Eco Design for Welding Equipment), this welder features a 4th generation inverter which is above 80% energy efficient. This means it uses less power at the same output as older inverters, helping to lower operating costs. It also includes Pure Synergic Control, which allows users to adjust welding voltage and wire feed speed autonomously. This simplifies the welding process at all skill levels and helps to achieve more consistent and higher quality welds. -
OFFER
The LONCIN GH9000i open-frame inverter generator seamlessly integrates cutting-edge LONCIN SPWMIII inverter technology, ensuring the delivery of clean, secure, and dependable power. With a thoughtfully crafted lightweight design, these generators stand out as they are 20% - 25% lighter compared to conventional open-frame units with similar power capabilities. The minimal waveform distortion rate guarantees the safe operation of delicate electronics such as laptops, smartphones, TVs, and tools. This generator serves as an efficient power supply solution, offering low fuel consumption, minimal noise, and exceptional cost-performance.Note *** In stock for immediate delivery or collection ***
-
Out of stock
ZIPPER ZI-EWB150-100l electric wheelbarrow is ideal for transporting debris around the house and garden. The ZI-EWB150-100l is part of the ONE-FOR-ALL series and therefore the battery is compatible for a range of ZIPPER tools. (Chainsaw/lawn trimmer/lawn mower/foliage blower,....)Note! Oversized, heavy or fragile delivery charge applies to this item!
-
Out of stock
ZIPPER ZI-EWB260 electric wheelbarrow is ideal for transporting debris even in demanding terrain around the house and garden. . The ZI-EWB260 is part of the ONE-FOR-ALL series and therefore the battery is compatible for a range of ZIPPER tools. (Chainsaw/lawn trimmer/lawn mower/foliage blower,....)Note! Oversized, heavy or fragile delivery charge applies to this item!
-
The ZIPPER gasoline high-pressure cleaner ZI-BHDR180 with brass pump for reliable 180 bar nominal pressure and high flow rate. Independent thanks to the gasoline engine and can also be used where no power supply is available. -
Zipper STB13T is the perfect light duty drill press for every small home or garage workshop. The robust construction and powerful motor combine to produce accurate hole drilling in wood, metal and plastics. -
High quality 15W (1400 Lumens) COB LED Rechargeable Pocket Worklight -
The SIP QT AIR DD 4.5hp 200ltr Ultra Low Noise Oil-Free Direct Drive Compressor is an innovative ultra low noise air compressor which operates at just 67dB and features slow-running 4-pole motor pump units for up to 50% longer life performance. Built to support demanding higher air volume in automotive environments and large workshops, this oil-free and low maintenance compressor delivers 22.8CFM piston displacement resulting in 18.2CFM Free Air Delivery (FAD) from a single phase supply. -
The SIP QT AIR DD 6ltr Ultra Low Noise Oil-Free Direct Drive Compressor is an innovative ultra low noise air compressor which features a slow-running 4-pole motor pump unit for longer life performance. Built for everyday applications, this oil-free compressor offers versatile and low maintenance use at 59dB. The direct drive pump has a 2CFM piston displacement resulting in 1.5CFM Free Air Delivery (FAD) for consistent air supply, ideal for general purpose work area uses and mobile applications. -
The SIP 1500w Induction Heater Kit is ideal for heating and releasing rusted-on or hard-to-remove parts such as nuts, bolts and fastenings. Designed for garages, automotive environments and workshops, the kit is supplied with 4x interchangeable induction heating coils which perform a variety of heat treatment tasks with precision and ease. Easy to control and highly efficient, this plug-and-play solution heats an M8 nut to 300°C in 60 seconds using an all-electric process. This offers greater levels of safety compared to oxyacetylene and other methods which use a naked flame. -
The SIP 3700w Induction Heater is perfect for releasing seized fixings, components and parts from vehicles and is suitable for manufacturing processes such as interference fittings, metal shrinking and heat treatment. This induction heater is designed for use in automotive and engineering workshop environments. The induction torch quickly and safely reaches high operating temperatures and uses a liquid cooling system to prevent the cable and torch from overheating. This maximises performance and protects the user's hands from the heat produced. This induction heater heats an M8 nut to 300°C in 30 seconds using an all-electric process, which offers greater levels of safety compared to oxyacetylene and other methods which use a naked flame.NOTE! This is a special order item and will be sent direct from supplier warehouse. Delivery 7/10 Days.
-
The SIP 1200w Handheld Induction Heater Kit is ideal for heating and releasing rusted-on or hard-to-move parts such as nuts, bolts and fastenings. Designed for garages, automotive environments and workshops, this kit is supplied with 4 interchangeable induction heating coils which perform a variety of heat treatment tasks with precision and ease. Easy to control and highly efficient, this induction heater kit safely operates with a recommended duty cycle of 2mins ON / 2mins OFF to maintain the cooling and integrity of the induction heating coils. This plug-and-play solution heats an M8 nut to 300°C in 120 seconds using an all-electric process. This offers greater levels of safety compared to oxyacetylene and other methods which use a naked flame.NOTE! This is a special order item and will be sent direct from supplier warehouse. Delivery 7/10 Days.
-
The SIP Heavy-Duty 5 Roller Stand is an essential tool for all workshops, providing reliable multi-purpose support for DIY, construction, and other woodwork applications, with an adjustable design able to accommodate larger and irregular timber. Designed for trade and professional woodwork applications. -
The SIP Adjustable V Roller Ball Stand is designed with 2 independently adjustable roller arms that lock between 0° and 45°, providing customisable support for DIY, construction, and other applications, accommodating both larger and irregular timber. Designed for trade and professional woodwork applications.
Free Delivery available on orders over €200 exclusions apply
